crossing road safety pedestrian led traffic light project
|Payment Type:||T/T,Money Gram,Western Union|
|Terms of Trade:||EXW|
|Delivery Time:||7 Days|
|Place of Origin:||guangdong|
Model No.: WDM-ZHBMX01
crossing road safety pedestrian led traffic light project
Pedestrian traffic light installation:Pole installation:
The L-shaped Bracket can be installed on the lamp, and then fixed on the pole with a screw; the hoop method can also be used.
Pedestrian crossing button installation:
Install on the pole of the pedestrian light,first put one end of the screw into the hole on the back of the button, and after the screw is set, connect the switch wire to the vertical post. Then insert the other end of the screw into the vertical rod, and then insert the gasket, spring piece and nut in order, and tighten the nut.
Pedestrian crossing system is mainly used in forks, school intersections, etc., using Taiwan wafer chip chip beads, LEDs are closely arranged, super high brightness, concentrated light, very large viewing angles, and good visual effects.
The induction screen and countdown timer box are made of cold-rolled sheet and welded. The cold-rolled sheet has good surface quality, no reflection, and anti-glare. Strength and wind resistance. The screen body adopts a double-layer structure, which has better sealing and dust resistance, and has good heat dissipation performance inside the screen body. The gantry display screen has complete Components, reliable assembly, stable structure, smooth corner transitions, no flashes, and no burrs.
When a person presses a button or the person crosses the infrared, the main pillar and the auxiliary pillar will issue a voice prompt, "Now a green light, please pass" to remind pedestrians that the maneuver turns red, the pedestrian turns green for 15s, the countdown counts down for 15s, and the display switches red text "Prohibited After passing for 15 seconds, the pedestrian line turns red, and the three mobile lights turn green for 30 seconds. After the countdown counts down for 30 seconds, the three yellow lights flash again. The pedestrian line is still red. When a person continuously presses the button or continuously breaks through the infrared, the response is 3 seconds button.
The whole machine is made of die-cast aluminum, with integrated design of pedestrian application and voice guidance for blind people. The product has a beautiful appearance.
The front and back of the pedestrian light housing adopt a combination of spring buckle design, which is convenient to open the light for maintenance and repair.
300mm full plate traffic lights installation: two ways
The L-shaped bracket can be installed on the lamp, and then fixed on the pole with a screw; the hoop method can also be used.
Install the L-shaped bracket on the luminaire, install an iron plate on the crossbar, the length should be the same as the luminaire, and then fix the L bracket on the iron plate with screws
Traffic guidance screen installation:
The common installation method of the induction screen is the back hoop installation. There are holes for the hoop on the back of the display. Use the hoop to hold the display on the crossbar tightly. Align the holes on the top, and then fasten the line with screws.
Voice prompt column installation:
The installation location is usually a pedestrian island waiting for a zebra crossing. When installing, pay attention to the sensor grating on the safety island on the same
side to face to face. Easy installation, unscrew the small screws of the base, pass the wires through the hole of the base as shown in the figure, install the base on the safety island, and fix the base with 4 screws, then put the post up, and then the small screws Just tighten it.
Double 8 Countdown timer traffic light Installation:
To install the sunshade on the lamp, first install the side sunshade and the upper sunshade on the lamp, align the holes, and tighten with screws; after installing the sunhat, install the inner hoop on the back of the lamp and the lamp hole Alignment, then tighten with M12 screws,and then install the lamp on the pole, the method is to fix it with a hoop, the outer hoop and the inner hoop hole alignment can be fixed with screws.
In addition to the crossing road safety pedestrian led traffic light project, Shenzhen Wide Way Optoelectronics Co., Ltd also produces other types of traffic lights:
1.Small traffic lights;
2.Led Traffic Light controller;
3.Solar Flashing Warning Light.
ShenZhen Wide Way Optoelectronics Co.,Ltd is a professional manufacturer of LED traffic products .We are specilized in LED traffic signal lights ,arrow traffic lights ,solar road stud ,traffic countdown timer,ETC ,LED pixels cluster ,traffic guide lights .etcOur company culture is keep on science and technology innovation and we have our own research team to develop new intelligent traffic product with purpose "Keep the road more safety.Our competitive is professional and comprehensive, and we have our own factory ,so we can offer factory-direct price,strict QC before products shipping out .We also provide good after serive ,if any questions about the products or others you can contact us freely , we will give you feedback in 24 hours.
- Company Name: Shenzhen Wide Way Optoelectronics Co., Ltd.
- Representative: LiSheng
- Product/Service: traffic light , traffic light module , led arrow board , outdoor led display , highway led traffic product , led speed limit sign
- Capital (Million US $): 5000000
- Year Established: 2011
- Total Annual Sales Volume (Million US $): Below US$1 Million
- Export Percentage: 51% - 60%
- Total Annual Purchase Volume (Million US $): Below US$1 Million
- No. of Production Lines: 6
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 5,000-10,000 square meters
- Factory Location: No. 2 Shenglian Road, Wulian Village, Fenggang Town, Dongguan City
- Contact Person: Ms. FionaHuang
- Tel: 86--13652406263
Premium Related Products